By the Koojo Custom Powder Coating production team | Updated 17 October 2026
Powder coating Hamilton manufacturers and fabricators depend on starts with a clean, cured finish that bonds to the metal and holds up under heavy use. Koojo Custom Powder Coating works from 10874 Steeles Ave E in Milton, Ontario, and has coated more than 10,000 items since 2012. We clean, spray and cure steel and aluminum work in-house, then return each part ready to install or assemble.
Standard orders carry a 48 hour turnaround, and we are open Monday to Friday, 7 AM to 5 PM. Send a sample part or a few photos, and we will confirm the prep, powder and timing before any work begins. If you need a finish for a single frame or a full production run, call (905) 876-7060 and we will explain the next step. One shop handles prep, coating, curing and inspection, so scheduling stays simple and quality stays consistent. That keeps Hamilton powder coating easy to manage from the first call to pickup.
Since 2012 | 10,000+ Items | Drive Time from Hamilton: 25–40 Min | Pickup & Delivery | 48 Hr Turnaround | 5.0 ★ Google Rating
What We Coat for Hamilton Businesses
We coat steel and aluminum parts for Hamilton businesses, from small brackets to heavy welded frames. Every part is cleaned, pretreated, sprayed with thermoset powder and cured, so the finish resists chips, corrosion and everyday wear.
Typical powder coating Hamilton orders include steel fabrication weldments, conveyor frames, machine guards, railings, enclosures, trailer parts and shelving. Electrostatic spray wraps powder around edges and corners, and chemical pretreatment prepares the surface so the coating bonds and corrosion resistance lasts. The result is a chip-resistant finish that keeps its look in service.
Our curing oven supports parts up to 6,000 lb, so a large part and a batch of small brackets can share one order. Each metal needs different prep, so we confirm the powder and colour with you before spraying. A recorded colour code lets a later batch match the first.
Whether parts are new or already in service, powder coating in Hamilton follows the same process here. We inspect parts on arrival, mask threads and contact points, and describe the finish before work starts. Each batch is checked for an even, complete finish before it leaves, which is how Hamilton powder coating orders avoid surprises.
Getting Parts to Koojo from Hamilton
Our Milton shop is roughly a 25 to 40 minute drive from Hamilton, depending on traffic and where you start. You can drop parts off yourself or ask about pickup and delivery when you request a quote.
From Hamilton, take the QEW or Highway 403 east, then Highway 407 or Highway 401 to Milton and follow Steeles Avenue East to 10874. Drop-offs are welcome Monday to Friday, 7 AM to 5 PM, so you can bring parts before a shift or on the way to a job site. Label each part and tell us the finish you want so we can confirm details before work begins.
Planning powder coating Hamilton orders around a deadline is easier with a short call first. Tell us the part type, size and quantity, and we will confirm whether to drop off, arrange pickup and delivery, or review photos before you travel. Early notice helps us fit your parts into the oven schedule.
Keep parts dry, remove loose debris and flag any areas that must stay uncoated, and we will mask them. With a 48 hour turnaround, even powder coating in Hamilton for tight timelines is worth a call. Repeat Hamilton powder coating orders can be scheduled ahead once we know your volumes.
If you are comparing quotes for powder coating Hamilton companies offer, ask how timing and pickup would work, because logistics matter as much as the finish. We would rather answer that before you commit than after parts are on the truck.
Local Industries We Serve Around Hamilton
Hamilton’s industrial districts, including Stoney Creek and the Red Hill Business Park area, are within reach of our Milton shop. We finish parts for fabricators, machine shops, manufacturers, contractors and equipment builders.
Fabricators and welding shops send weldments that need a uniform coat before assembly. For Hamilton powder coating on machine shop parts, clean masking keeps threaded holes and mating faces bare. Manufacturers want steady colour from one batch to the next, and contractors need railings and structural steel that can take a beating on site.
Metal-products suppliers near the harbour often send heavy, welded pieces, and we plan racking so powder reaches every weld and corner. Food and agri-food equipment builders can ask about washdown-resistant finishes and FDA-compliant powders suited to the application. We match prep, powder and curing to the part and explain the options plainly, which is how powder coating Hamilton industries rely on gets specified with confidence.
Because each sector wears parts differently, tell us how the part will be used and where it will sit. We will recommend a prep and powder plan before you commit, which is the practical value of powder coating in Hamilton handled by one shop from prep to cure.
Repeat orders are common here. We record the powder and finish for each job, so powder coating Hamilton buyers get a later batch that matches the first, even when part shapes change.
Services Available to Hamilton Customers
Hamilton customers can book sandblasting, surface preparation, custom colours, restoration and bulk production runs. Three services cover most requests: industrial powder coating for frames and equipment, sandblasting services for rust and mill scale, and custom powder coating colours for matched or branded finishes.
Mobile sandblasting is available when a part is hard to move. Abrasive blasting strips rust and old coatings before pretreatment, and a RAL colour match, gloss, matte or textured finish can follow. Bulk orders and one-off parts are quoted by part type, size and quantity, and Hamilton powder coating jobs of either kind get the same careful prep.
Stripping and recoating can be combined with coating in one visit, so powder coating in Hamilton jobs go from rust removal to final cure under one roof. Our certification through the Absolute Bureau of Certification supports consistent quality, and test reports are available on request. For powder coating Hamilton teams can approve quickly, start with photos of the parts.
Project Work for Hamilton Customers
Our case studies show the kind of work Hamilton shops can send our way: conveyor and automation line frames, food processing line frames, robotic bases, safety bollards and church gates. Each one records the part, metal, size, powder, colour code and turnaround.
Reading one before you order shows how we prep, rack and cure a comparable part. Mention a project you like in your quote request, and we will explain how the same approach fits your parts and your powder coating Hamilton timeline. Clear records are why Hamilton powder coating repeat orders can match the first batch. Before and after photos and short notes on the finish help your team know what to expect.
Find Koojo: Directions from Hamilton
Koojo Custom Powder Coating is at 10874 Steeles Ave E, Milton, ON L9T 2X8. Drivers from Hamilton usually reach us by the QEW or Highway 403 and then Highway 407 or Highway 401, and we are open Monday to Friday, 7 AM to 5 PM.
Call (905) 876-7060 or email sales@koojopowdercoating.com before you leave so we can confirm your parts and timing for your powder coating Hamilton order. Use our Contact Us page for directions and drop-off details. Koojo is a powder coating company GTA shop that also serves the Hamilton area, and you can see every one of our powder coating service areas online. Hamilton powder coating drop-offs are welcome during opening hours.
Get Your Hamilton Quote
Send photos, sizes and quantities for powder coating Hamilton projects, and we will confirm the finish, timing and pickup or delivery options. Call (905) 876-7060 or request a powder coating quote online, Monday to Friday, 7 AM to 5 PM. Ask about prep, powder choice and timing before you commit, and we will answer in plain terms.
Visit or contact the shop
Office hours
Monday to Friday, 7 AM to 5 PM
Phone
(905) 876-7060Koojo is a powder coating company GTA businesses have used since 2012. See contact details and directions.
Frequently asked questions
question
answer
question
answer
question
answer
question
answer
question
answer
question
answer