
Specialty powder coating gives unusual parts, test pieces and art pieces a tough, even finish that suits the job instead of forcing it into a standard run. At Koojo Custom Powder Coating, our Milton team coats single pieces and small sets with the same care as large orders. Since 2012, we have finished more than 10,000 items for customers across the GTA, with a 48-hour turnaround on typical orders. Whether you need one-off powder coating for a sculpture or a repair, we plan every step around your part. Call (905) 876-7060, Monday to Friday, 7 AM to 5 PM, or request a specialty powder coating quote below.
Since 2012 | 10,000+ Items | 48 Hr Turnaround | 5.0 ★ Google Rating
What Is Specialty Powder Coating?
Specialty powder coating is a dry finishing process for unusual, one-off or custom metal parts, in which electrostatically charged powder is sprayed onto the part and heated in an oven until it cures into a hard, even layer. It suits work that does not fit a standard production run.
The finish is made from thermoset powder, which cures with heat instead of drying like liquid paint. At a cure temperature of 180 to 200 °C, the powder flows, bonds to the metal and hardens into one continuous coating without runs or drips. That makes it a dependable corrosion-resistant and chip-resistant choice for parts that face weather, handling and wear. As a form of specialty metal finishing, it is often chosen where a part is hard to replace.
Typical projects include one-off parts, test builds, custom fabrications and decorative metalwork, along with metal sculptures from artists and makers. Good one-off powder coating depends on planning each job from the bare metal up, so our specialty powder coating is planned around the part in front of us, not a standard recipe. Our wider powder coating services cover the full range of work we do.
Our Specialty Powder Coating Process
Our specialty powder coating process has six stages: intake and inspection, cleaning and pretreatment, masking, powder application, oven curing and final inspection. Each stage is documented, so a repeat of your project matches the first piece. The same controls support our industrial powder coating work.
Step 1 – Intake and Inspection: We check each part for rust, old coatings, weld seams and damage, then confirm the finish and your timing. Unusual shapes are studied first, because hanging a part so every surface can be reached is often the hardest step on a single job.
Step 2 – Cleaning and Pretreatment: Parts are washed and chemically treated so the powder bonds to clean metal. Skipping this stage is a common reason finishes fail early. Parts that need old coatings removed first may suit our powder coat stripping and recoating service.
Step 3 – Masking and Plugging: Threaded holes, bearing surfaces and mounting points are protected before coating. Masking and plugging keep bolts turning and parts fitting, which matters when there is only one part and no spare.
Step 4 – Electrostatic Powder Application: Charged powder is applied by electrostatic spray onto the grounded part, so it wraps around tubes, corners and recesses. This helps even coverage on irregular shapes that a flat panel recipe would miss.
Step 5 – Oven Curing: The part moves into the curing oven, where specialty powder coating reaches temperature and hardens. Cure time depends on the powder and the mass of the part, so a heavy casting is planned differently from a thin decorative piece.
Step 6 – Final Inspection and Handoff: We inspect the cured finish for coverage, adhesion and appearance. Typical orders are ready within 48 hours, and unusual jobs are scheduled when we quote. We receive parts Monday to Friday, 7 AM to 5 PM. We also record the colour code and powder used, so a later piece can match.
Our small-batch powder coating schedule keeps parts from waiting between steps, and for a tight lead time, tell us your date at quote.
Parts and Metals We Coat
We apply specialty powder coating to steel, aluminum and cast parts, including test parts, brackets, decorative panels, sculptures and welded assemblies. Our capabilities page lists 6,000 lb capacity, so heavy pieces, long frames and odd shapes are all worth a quote, and we confirm fit at intake.
- One-off parts: replacement pieces, repairs and single custom items.
- Prototypes: test parts and early builds that need a durable finish.
- Art and decor: signs, stands and powder coating for art pieces.
- Custom fabrications: frames, fixtures and welded builds.
- Small sets: a handful of matching pieces coated together.
Metals we handle include steel for frames and supports, aluminum for lighter pieces, and cast parts such as housings and ornaments. Good specialty powder coating on mixed metals also depends on how parts are hung, so we confirm that at intake. Our prototype powder coating starts with a material check, because the right prep and cure plan depends on the metal and the thickness of the part. Send photos and dimensions with your request, and we will tell you how your part will be coated.
Finish and Option Choices
Specialty powder coating comes in gloss, satin, matte and textured finishes in many colours. We confirm the powder type, colour code and film thickness at quote, so the finish suits the part, the metal and its use. For wider palettes, see our custom powder coating colours page.
Option | What it gives you | Best for |
|---|---|---|
Gloss | A smooth, high-shine look | Display pieces, decor |
Matte or satin | Lower glare and hides light scuffs | Fixtures, enclosures |
Textured | Hides small surface marks and adds grip | Handled parts, stands |
Film thickness | Typical film is 2 to 4 mils, confirmed on fit-critical parts | Tight tolerances, threaded parts |
Colour match | A RAL colour or sample matched to your piece | Repairs and matching sets |
Whatever you pick, we match the finish to how the part will live, whether that is an outdoor gate or an indoor display. For specialty powder coating that must match an existing piece, send the piece or a sample. Film thickness affects fit, so flag tight tolerances before we coat.
Quality Standards for Specialty Powder Coating
Our specialty powder coating follows recognized standards: ASTM D3359 for adhesion, ASTM D7091 for dry film thickness and ASTM B117 for salt spray resistance on every order. Koojo is certified through the Absolute Bureau of Certification, and test reports are available on request.
Quality starts at intake and ends at handoff. After curing, a good finish looks even in colour and gloss, with no thin spots, runs or bare edges. Edges, welds and recesses get particular attention because thin spots usually appear there. We flag any concern with you before parts leave the shop.
An adhesion test checks that the coating bonds to the metal. Dry film thickness readings confirm the coating is neither too thin to protect nor too thick to fit. The salt spray test measures corrosion resistance in a controlled chamber. It is a comparison tool rather than a promise of real-world life, so we explain what results mean for your specialty powder coating order.
Because a unique piece has no second chance, each part is checked before it leaves the shop. Careful finishing of a one-off piece also depends on clean prep and correct curing, so every order follows the same documented steps. Good rust protection comes from that prep and cure, not from colour alone. See our certification page for details.
Recent Project: Church Gates
Our church gates show how we handle decorative metalwork that people see up close and that stays outdoors in every season. Work like this has to look right and resist weather, the same demands that a custom piece of your own will face.
The case study records the part, metal, size, powder, colour and turnaround, with before and after photos. Read the church gates case study to see the standard behind our work, and expect the same documented approach on your specialty powder coating order.
Businesses and Makers That Use Specialty Powder Coating
Machine shops, fabricators, artists, builders and facility managers use our specialty powder coating most. These customers want a dependable finish on parts that are unusual, hard to replace or built to order, whether they send one piece or a small matched set.
See how we support powder coating for machine shops, who often send precision pieces with threads and bores that need masking, and powder coating for municipalities, who need tough finishes on custom public metalwork.
Get a Specialty Powder Coating Quote
Ready to coat your next unusual piece? Send photos, dimensions and your finish choice through our quote form, or call (905) 876-7060, Monday to Friday, 7 AM to 5 PM. Visit 10874 Steeles Ave E, Milton, or contact us with questions.
Frequently asked questions
question
answer
question
answer
question
answer
question
answer
question
answer
question
answer