10874 Steeles Ave E, Milton, ONMon to Fri, 7 AM to 5 PM(905) 876-7060

Powder Coating Mississauga

Industrial powder coating for Mississauga and Peel Region manufacturers from our Milton shop.

Powder coating Mississauga businesses can count on starts at Koojo Custom Powder Coating, a Milton shop finishing metal parts for GTA customers since 2012. We apply a durable, even thermoset finish to steel and aluminum parts, with a 48 hour turnaround. Fabricators, machine shops, contractors and manufacturers in Peel Region can send us frames, guards, railings, brackets and production batches.

If you need powder coating in Mississauga that resists chips, corrosion and daily wear, our team prepares, coats and cures every part in-house. More than 10,000 items have gone through our shop, and each one gets the same careful prep. Call (905) 876-7060 or send photos of your parts for a quote. We are open Monday to Friday, 7 AM to 5 PM. Our shop, ovens and quality checks are all under one roof in Milton, which keeps handling to a minimum and results consistent from the first part to the last.

Drive Time from Mississauga: 20–35 Min | Pickup & Delivery | 48 Hr Turnaround | 5.0 ★ Google Rating

What We Coat for Mississauga Businesses

We coat steel and aluminum parts for Mississauga customers, from small brackets to heavy welded frames. Each piece is cleaned, pretreated, sprayed with thermoset powder and cured in our oven, so you get a finish that lasts through hard daily use.

For powder coating Mississauga manufacturers and fabricators build into production, we handle conveyor frames, machine guards, bollards, railings, trailer parts, enclosures and shelving. Electrostatic spray lays down an even coat that wraps edges and corners, and chemical pretreatment helps the powder bond and supports corrosion resistance. The result is a chip-resistant finish that, with the right powder, holds its colour outdoors.

Our curing oven supports parts up to 6,000 lb, so large part work fits as easily as small batches. Steel parts and aluminum parts can run side by side, and we confirm the powder and colour with you before spraying. Mississauga powder coating projects range from one-off parts to full production runs.

Whether you need powder coating Mississauga fabricators can install straight from the truck or a quick refresh for equipment already in service, the process stays consistent. We inspect incoming parts, mask threads and contact points, and cure every batch to the powder maker’s schedule. Mississauga powder coating customers receive a clear finish description before we start.

Getting Parts to Koojo from Mississauga

Our Milton shop is about a 20 to 35 minute drive from most of Mississauga, depending on traffic and your starting point. You can drop parts off yourself or ask about pickup and delivery when you request a quote.

From Mississauga, take Highway 401 west or Highway 407 to Milton, then follow Steeles Avenue East to 10874. Drop-off is open Monday to Friday, 7 AM to 5 PM, so you can bring parts before a shift or on a lunch break. Label each item and tell us the finish you want, and we will confirm details before work begins.

With a 48 hour turnaround, planning is simple. Call ahead for the current schedule, and ask whether pickup and delivery suits your order when you plan powder coating in Mississauga for larger or recurring jobs.

A short call saves a day on the road. Tell us the part type, size and finish, and we will confirm whether to drop off, arrange pickup and delivery, or send photos first. For powder coating Mississauga deadlines that cannot slip, early notice helps us plan oven time around your date. Keep parts dry, remove loose debris and flag any areas that must stay uncoated, and we will mask them. Mississauga powder coating schedules for repeat orders can be planned in advance.

Local Industries We Serve Around Mississauga

Mississauga’s industrial areas, including Meadowvale Business Park and the Airport Road corridor, are within easy reach of our shop. We coat parts for metal fabricators, machine shops, contractors, manufacturers and food processing equipment makers.

Metal fabricators and welding shops send weldments that need a clean, uniform finish before installation. Mississauga machine shops need precise masking so threaded holes and mating surfaces stay clean. Mississauga contractors rely on durable railings and structural steel that survive job sites, while manufacturers need steady results across repeat batches.

Food processing equipment makers can ask about washdown-resistant finishes and FDA-compliant powders suited to the application. In every case, we match prep, powder and curing to the part and explain the options in plain language. That is how we deliver reliable powder coating Mississauga industries can specify with confidence.

Agricultural and heavy equipment builders ask for coatings that stand up to mud, moisture and road salt, and municipal and institutional buyers specify bollards, park equipment and metalwork that must last for years. Our pretreatment and curing steps stay the same for every sector, which keeps results predictable whether you are coating a few parts or a full batch. Because needs differ, powder coating in Mississauga for a farm trailer will not match a food line frame, so tell us how the part will be used and the powder coating Mississauga specification follows from that.

Services Available to Mississauga Customers

Mississauga customers can book sandblasting, surface preparation, custom colours, restoration and bulk production runs. Three services cover most requests: industrial powder coating for frames and equipment, sandblasting services for rust and mill scale, and custom powder coating colours for branded or matched finishes.

Mobile sandblasting is also offered, so ask us if a part cannot easily travel. Abrasive blasting removes rust and old coatings, then pretreatment prepares the metal. For colour, we can work toward a RAL match and choose gloss, matte or textured finishes. Mississauga powder coating for bulk orders is quoted by part type, size and quantity, and one-off parts get equal care.

Our certification through the Absolute Bureau of Certification supports consistent quality, and test reports are available on request.

Surface preparation, stripping and recoating can be combined with coating in one visit, so one shop handles rust removal through final cure. Automotive parts, wheels, rims and architectural railings are also welcome, and our Mississauga powder coating team can point you to the right option. For powder coating Mississauga customers need quickly, start with a photo.

Project Work for Mississauga Customers

Our portfolio shows the kind of work Mississauga plants and fabricators can send us, including conveyor frames, automation line frames, food processing line frames, robotic bases, safety bollards and church gates. Each case study lists the part, metal, powder, colour code and turnaround.

A typical job starts with photos and basic specs, moves through prep and coating, and returns ready to install. Before and after photos, plus clear notes on the finish used, help your team see what to expect from powder coating Mississauga projects of any size.

Every case study also notes the prep method and colour code, so repeat orders can match the first batch. If you want a result like one of our examples, mention it in your quote request and we will explain how the same approach applies to your part. Mississauga powder coating projects benefit from that clear record.

Find Koojo: Directions from Mississauga

Koojo Custom Powder Coating is at 10874 Steeles Ave E, Milton, ON L9T 2X8. Visitors from Mississauga can reach us via Highway 401 or Highway 407, and we are open Monday to Friday, 7 AM to 5 PM.

Call (905) 876-7060 or email sales@koojopowdercoating.com before you head over so we can confirm your parts and timing for any powder coating Mississauga order. For full directions and drop-off details, use our Contact Us page. Koojo is a powder coating company GTA customers can reach by phone, email or in person, and you can see all our powder coating service areas online. Drop-offs for powder coating in Mississauga orders are welcome during opening hours.

Get Your Mississauga Powder Coating Quote

Send photos, sizes and quantities for powder coating Mississauga projects, and we will confirm the finish, timing and pickup or delivery options. Call (905) 876-7060 or request a powder coating quote online, Monday to Friday, 7 AM to 5 PM. If you are comparing options, ask us anything about prep, powder choice or timing before you commit, and we will answer in plain terms.

Visit or contact the shop

Address

10874 Steeles Ave E
Milton, ON L9T 2X8

Get directions

Office hours

Monday to Friday, 7 AM to 5 PM

Frequently asked questions

question

answer

question

answer

question

answer

question

answer

question

answer

question

answer

Ready to get your parts coated?

Tell us what you have and when you need it back.