10874 Steeles Ave E, Milton, ONMon to Fri, 7 AM to 5 PM(905) 876-7060

Sandblasting Services & Mobile Sandblasting

Abrasive blasting that strips rust, mill scale and old coatings back to clean metal, in our shop or on site with mobile sandblasting.

Fabricated frames and bare steel plate on the shop floor

Sandblasting services remove rust, scale and old surface contamination so bare metal is ready for a lasting powder coat. At Koojo Custom Powder Coating, our Milton team uses abrasive blasting in the shop and offers mobile sandblasting for parts and structures that cannot travel. Since 2012, we have finished more than 10,000 items for fabricators, manufacturers and contractors across the GTA, with a 48-hour turnaround on shop work. Whether you have welded frames, aging railings or heavy equipment, we match the blasting method to the metal and the finish you want. Request a sandblasting quote below, or call (905) 876-7060, Monday to Friday, 7 AM to 5 PM, to talk through your project. Careful sandblasting before powder coating keeps the finish bonded for years.

Since 2012 | 10,000+ Items | 48 Hr Turnaround | 5.0 โ˜… Google Rating

What Are Sandblasting Services?

Sandblasting services use compressed air to drive abrasive media against metal, removing rust, scale and old surface debris. The result is clean, bare metal with an even texture that lets powder coating grip firmly and last for years, even in tough outdoor conditions.

The word sandblasting is common, but most modern work uses other abrasives, so the broader names are media blasting and abrasive blasting. Each media cuts differently. Aluminum oxide blasting and steel grit blasting cut fast and leave a rougher surface, while glass bead blasting leaves a smoother, cleaner finish. The texture left behind is called the surface profile, or anchor profile, and it gives powder something to hold. Good blast cleaning removes everything that would stop a coating from bonding and leaves a bare metal finish ready to coat.

That is why we treat industrial sandblasting as part of the coating process, not a separate chore. Sandblasting and powder coating work best when one team plans both, because clean steel starts to show flash rust soon after blasting. Skipping this link in the chain is the most common reason a coating fails early.

How Does Our Sandblasting Process Work?

Our sandblasting services follow five stages: inspection, blast media selection, blasting, cleanup, and handoff to coating. Each stage protects the metal and the finish, and blasted parts move to coating quickly so rust never gets a chance to return to the metal before the coating goes on.

1. Inspection and planning (on arrival). We check each part for heavy rust, pitted and scaled steel, weld spatter and thin sections. We then decide whether the job suits our shop or on-site sandblasting. Early inspection lets us flag problem areas before they cost you time.

2. Blast media selection. The right media depends on the metal and the finish you need. Tough rust and scale call for harder media, while softer metals and cosmetic parts need gentler options. We confirm the choice with you when the finish or tolerance is critical.

3. Blasting. Our operators work across every surface, including welds, corners and recesses. They adjust pressure and distance so rust and mill-scale removal is complete without damaging thin sections. Industrial sandblasting at this stage is methodical, never rushed.

4. Cleanup. Compressed air and brushing clear spent media and dust from holes, seams and enclosed sections. Trapped grit would cause defects under the powder, so we never skip this step.

5. Inspection and handoff. We confirm a uniform, blast-cleaned surface, then move the part toward coating as soon as possible, since flash rust can form quickly on clean steel.

Timing matters as much as technique. Shop blasting sits inside our standard 48-hour turnaround, and we receive parts Monday to Friday, 7 AM to 5 PM. For mobile sandblasting, tell us the site, access and schedule when you request a quote and we will plan the visit around your deadline. Industrial sandblasting is scheduled alongside coating, so a blasted part never waits long between steps. That planning prevents the gaps that let bare metal rust, and it keeps your project moving.

Which Metals and Parts Need Sandblasting?

Steel and iron benefit most, because rust and scale form naturally on them. Cast parts, structural steel, fabricated frames and heavy equipment also respond well. Thin or soft metals need gentler media, so our sandblasting services plan the method for each metal before blasting starts.

  • Steel and iron. Sandblasting steel removes rust and mill scale, the hard grey layer left by hot rolling that blocks coating adhesion. It is the most common job we handle, and it suits everything from small brackets to large frames.
  • Welded and cast parts. Sandblasting weldments cleans weld discoloration and spatter, and gives rust removal from metal even in tight corners.
  • Aluminum and softer metals. Gentler media protects the surface, so we choose finer abrasives and lower pressure for these parts, which keeps edges and details sharp.

Typical work includes sandblasting structural steel, sandblasting gates and railings, sandblasting trailers and frames, machine bases and equipment housings. Sandblasting heavy equipment and sandblasting large fabrications can be done in our shop or on site, so confirm the part size when you request a quote. Whether you need sandblasting metal parts one at a time or industrial sandblasting for a full production run, we plan the abrasive blasting to protect the metal.

What Sandblasting Options Does Koojo Offer?

Koojo offers shop blasting for parts we can move, a mobile service for work on site, and a choice of blast media to suit the metal. Blasting is most often paired with powder coating, so ask us how your job should be planned from start to finish.

  • Shop sandblasting. Parts come to our Milton shop, where blasting happens in a controlled setting with dust containment and a fast route into coating.
  • Mobile sandblasting. Our mobile blasting crew brings on-site blasting equipment to structures, large frames and fixed equipment that are hard to move. Portable sandblasting equipment suits these jobs. Share site access and layout when you quote.
  • Media choices. Blast media selection covers aluminum oxide, steel grit and glass bead, matched to the metal and the finish you want. Larger industrial sandblasting jobs often use a mix of media.
  • What comes next. After blasting, many parts still need washing and masking, which our powder coating surface preparation service covers. Parts with aged coatings may suit our restoration and recoating service.

Not sure which option fits? Send photos and the part material. We will recommend an approach, and our sandblasting services advice comes with your quote. Choosing the right method up front avoids a damaged part, and protects the rust protection your coating is meant to provide.

How Do We Check Blasting Quality?

We verify blasting through visual inspection and a surface check before coating. Koojo is certified through the Absolute Bureau of Certification, our inspection steps are documented, and test reports are available on request, so you can trust the work behind every finish.

Quality starts at intake, when we look for heavy rust, thick scale and old coatings. After blasting, a blast-cleaned surface should look even in colour, with no shiny rust patches, leftover scale or traces of old paint. Surface profile matters too. If the surface is too smooth, powder grips poorly, and if it is too rough, peaks can show through the finish and shorten its life. We check this before parts move on, and we flag any concern with you early.

Our sandblasting services are never signed off until the part passes these checks. Consistent industrial sandblasting also means the next batch matches the last, because we keep records that support repeat orders. Cleanup is part of quality. Loose grit left in seams spoils the coating, so we clear it before parts move on. Because clean bare steel can show flash rust quickly, we plan coating soon after blasting, and we hold shop and mobile work to the same documented checks every time. See our certification page for details on how we work. Careful abrasive blasting also leaves the clean bare steel that strong coatings need.

See Sandblasting in a Real Project

Outdoor metalwork such as bollards and gates collects rust, scale and old coatings, which makes sandblasting services a smart first step. Our safety bollards case study documents the part, metal, size, powder, colour code and turnaround for a real customer, so you can see what a documented job looks like.

Read the safety bollards project to see the finished result. Before and after photos show the standard we hold ourselves to, from the bare metal stage through to the finished coating, and the same documented approach applies to your parts.

Which Industries Use Our Sandblasting Services?

Fabricators, contractors, farm and heavy equipment owners and manufacturers use us most. These customers need dependable industrial sandblasting, quick turnaround and a clean surface that supports coating. Our approach scales from single parts to production runs, with the same care every time.

See how we support contractors and construction teams, who often need work done on site, and agricultural and heavy equipment owners, where heavy rust is the main concern, so you can find the page that matches your work. Our sandblasting services also support our wider industrial powder coating work and the full range of powder coating services at our Milton shop.

Get Your Metal Blasted Right

Ready for clean, bare metal and a lasting finish? Send part photos and details through our quote form for sandblasting services advice, or visit 10874 Steeles Ave E, Milton, Monday to Friday, 7 AM to 5 PM. Call (905) 876-7060 or email sales@koojopowdercoating.com.

Frequently asked questions

question

answer

question

answer

question

answer

question

answer

Ready to get your parts coated?

Tell us what you have and when you need it back.